Constructions Standards Checklists

TILE ROOF GENERAL

ROOF CLADDING AND DRAINAGE  A. Tiles are layered shingle style from the eaves to the ridge and properly attached with nails. Additional fasteners are required per industry standard in snow areas.  B. Gable end tiles are layered in shingle style with

each tile covering the nail used to attach the previous gable end tile when possible. All nails are to be sealed on the exposed side of the tile.  C. Ridge tiles cover the nails used to fasten the tiles on the main roof and the nails used to fasten the previous ridge tile.  D. Battens installed where required by design or local code.  E. All roof penetrations are properly integrated with the underlayment and tile and flashed with flashing of the correct type and size for the penetration.  F. Roof vents installed per design and code requirements.  G. The frst row of tiles overlaps the drip edge by no more than 1/2" and risers are installed to support the tiles.  H. Apron flashing is installed at the shed roof-to-wall intersection and properly integrated with the drainage plane.  I. Continuous flashing is installed at rake roof-to-wall intersections and properly integrated with the drainage plane.

CONSTRUCTION STANDARDS CHECKLISTS | Roof Cladding & Drainage | 51